Description
BRT 10VG-HM4 Adjustable analog voltage signal generator output range can be 0-3.3V, 0-5V, 0-10V, etc., and it has three types of display mode: actual voltage value display; 0.0-100.0(%) percentage display; 0.0-50.0(Hz) display. It can also output voltage signal automatically in circular curves forms. This voltage signal generator is also a voltage source or controller, and widely used in PLC, variable frequency drive debugging and testing, etc.
Main Features
• 0-10V adjustable signal output, customized 0-5V or 0-3.3V signal outputs are available.
• LCD display with back light for different lighting conditions.
• LCD Display mode: voltage value display; optional 0.0-100.0(%) display, 0.0-50.0 (Hz) display.
• Encoders’ adjustment, can be configured into manual adjustment mode or automatic signal output mode in continuous curve form.
• Display accuracy (Adjustment): 0.1 (Fine adjustment) or 1.0 (Rough adjustment).
• Have power supply reverse polarity protection, and output short-circuited connection protection.
Technical Specifications
| Power supply: | 4-24VDC ( power supply voltage must be 2V higher than the output, e.g.: output 0-5V, please use ≥7V power supply.) |
| Accuracy: | ±0.05V (*Accuracy can be calibrated by the user.) |
| Output current: | Â max. 200mA |
| Output: | Default 0-10V or 0-5V or 0-3.3V manual output. User can config it into automatic signal output in curves form below. |
| Dimension: | 79.5 x 42 x 23.5mm (L x W x H) |
| Cut-out size: | 77 x 40mm (L x W) |
Programmable Automatic Volt. Signal Output in Curves Form below
*User can set and config the signal generator manual output model into automatic curves output mode based on actual applications. In manual output mode, user needs to rotate the knob to change output signal value. In automatic curves output mode, the signal generator will output voltage signal based on user pre-set curves parameters value.
0-5V 0-10V Signal Generator Wiring
Dimension
Reviews
There are no reviews yet.